Skip to main content

How to clean kitchen cabinets

Of all the rooms in your home, your kitchen is the area that likely deserves a good deep clean. Perhaps the most neglected area is your kitchen cabinets. It can be tedious emptying all of the contents, inspecting for hazards, dusting, cleaning, drying, and then putting all your dishes and appliances back in place.

However, it is important because those untouched, closed-off nooks and crannies can house harmful mold, insects, and other undesirable nuisances. There are ways to make it a simpler process. If you’d like to know how to clean kitchen cabinets more efficiently, take a look at these helpful suggestions.

Image used with permission by copyright holder

Make sure you have the right cleaner

Before you start emptying your cupboards, take stock of the type of textiles you are cleaning. Most kitchen cabinets are crafted with some type of wood, and woods can be sensitive to many types of cleaners. If you grab whatever cleaners you happen to have on hand, you run the risk of staining, warping, or stripping the varnish from your wood. Depending on the finishes of the handles and knobs, you should keep in mind certain polishes, also. Brass, silver, and other metals will really shine with the correct solution.

Recommended Videos

Homemade solutions that make effective cleaners

You don’t need to drive to the store for a specialty cleaner because you likely have everything you need stored at home.

Vinegar

Vinegar has long been utilized for its ability to break down tough dirt and grime. If you mix a solution made with equal parts vinegar and warm water, that will be a great starting point. It’s even better when poured into a spray bottle so you can distribute your solution more effectively as you clean.

If your cabinets are sticky or greasy or haven’t been cleaned in a long time, you may want to add a few drops of liquid dishwashing detergent to the vinegar solution. If they aren’t filthy and you’re just doing maintenance cleaning, leave the soap out of the mixture since soap can leave a residue that will require you to wipe the cabinets again, and you don’t want to create more work for yourself.

Vegetable oil and baking soda

You can also try mixing 1/2 cup of vegetable oil with 1 cup of baking soda until a paste forms. Scrub with it, and then make sure to wipe off any excess before smoothing things over and drying.

White vinegar and olive oil

Lastly, a tried and true wood cabinet formula can be made using 1/2 cup of white vinegar, 1/4 cup of olive oil, one tablespoon each of lemon juice and vegetable glycerin, and 20 drops of lavender essential oil. Mix well and spray before scrubbing.

Dish soap

If you are worried that vinegar will take off the finish of your cabinets, just use a light soap solution. Dish soap in small amounts will work great at eliminating grime and thick layered dust. Using small scrubbers or cleaning toothbrushes will aid you in cleaning the corners and other hard-to-reach places.

Make sure you clean everywhere

If you want things to feel truly fresh and thoroughly clean, leave no stone unturned. Now that you’ve emptied everything out, you might as well make it worth the time spent. Clean the inside of your cabinet doors, the sides, and the top and bottom of each shelf. Even if you use liners, you may be surprised that dust and sticky residue can still collect between a liner and the actual shelf. If you end up wiping out crumbs or other debris, save the mopping of the floors for last. It is vital for you to allow all surfaces to dry completely before returning all your belongings to their designated places.

Get the crevices

Most cabinets and drawers have crevices or trim that require some finer detailing. Dip an old toothbrush into the vinegar and water solution and scrub the intricate places that cloth just won’t get into. A toothbrush also works well on the narrow sides of the drawers and cabinets. If there are stubborn spots such as chocolate or syrup, you can make a paste out of either salt or baking soda and vinegar and use the toothbrush to scrub the stain. Don’t press too hard, though, or you’ll scratch the surface of the cabinet. Once you’ve finished with the toothbrush, wipe the insides of the doors and drawers.

Pay attention to handles and knobs

Now is also a good time to take off any handles and knobs that need to be cleaned. Make a separate bowl of hot water and white vinegar to soak them in while you complete the rest of the steps below. After soaking, most will need a final wipe and rinse before you put them back on your clean cabinets. This also gives you a chance to tighten loose screws. If you find some of the screws are loose and won’t tighten, a bit of wood glue will do the trick.

Consider taking off the cabinet doors

In addition to removing all of your stored items from your cabinets, grab a screwdriver and remove the doors, as well. If you’re not sure how to clean kitchen cabinet doors, just pay attention to the textile. If they are the same wood-type surface as the interior of your cabinets, you can use the same solution you’ve already prepared.

Purge unwanted items

Purge unwanted items and chipped dishes as you remove everything from your cabinets. A good purge is always freeing and fulfilling.

Image used with permission by copyright holder

Enjoy the fruits of your labor

If you are putting off the deep clean of your kitchen, don’t wait another day. With these helpful tips, you can easily prepare your cabinets, mix your own natural cleaning solution, and de-gunk your kitchen cabinets with ease. Make sure you use chemicals that are non-abrasive to your cabinet’s textile. Keep in mind that many of the best cleansers are already in your pantry. Little steps like removing cabinet doors and grabbing a cleaning toothbrush will make this task feel less strenuous for you. When you’re done, not only will you feel accomplished, but your kitchen will feel brighter and lighter.

21Oak Contributor
Former Digital Trends Contributor
How to clean your gross bathroom in 20 minutes flat
This overused space deserves a deep refresh
A clean bathroom

You want your bathroom to be a spa-like retreat, but it sees a lot of use throughout the week. While it's best to freshen as you go to prevent a build-up of dirt and grime, sometimes it just needs a deep clean. The thought of diving into the sink, toilet, and shower can be a bit overwhelming, though, especially at the end of a long week.

Take a deep breath — there's no need to fear. By tackling your dirty bathroom in stages, you can clean your bathroom, from top to bottom, in 20 minutes flat. We'll walk through all the tips and tricks you need to scrub your bathroom and still have time left on your podcast.
How to clean a bathroom: Step by step

Read more
How to paint your kitchen cabinets in 9 simple steps
A simple and low-cost way to refresh your space
Man holding paint rolling after painting kitchen cabinets

Kitchen renovation is one of the most impactful and cost-effective home remodel projects, with returns on investment of about 87 percent. While it’s no wonder that kitchen remodels are popular, but they’re also very expensive — cabinetry alone runs $5,000 to $6,000 on average. If money is tight, or your kitchen only needs a minor update, painting the cabinetry, rather than replacing it, will save you thousands of dollars while giving the room a completely new look. Plus, you can do it yourself in a couple of days.
Tools and supplies you'll need for the job

Rosin paper
Painter’s tape
Plastic sheeting
Screwdriver 
Household cleanser or trisodium phosphate commercial degreaser
Abrasive pad
Liquid deglosser
Wood filler
Putty knife
100-grit sandpaper
220-grit sandpaper 
Tack cloth 
Latex caulk 
Paint scraper
Primer paint
Trim or enamel paint with a durable, high-sheen finish
4- or 6-inch roller, with foam cover
3- or 4-inch square brush
2 ½- or 3-inch angle brush

Read more
Sanded vs. unsanded grout: How to know which one to use
Make sure you use the right materials for your tile project
Hand applying grout to glass tile.

Choosing the right grout for your tiling project can significantly impact both the aesthetic and durability of your work. The debate of sanded vs. unsanded grout is a common one among DIY regrouting enthusiasts and professionals alike. That's why we are going to explore the differences between these two types of grout, discuss the best applications for each, and provide tips on care and cost considerations.
Sanded vs. unsanded grout: What's the difference?

Sanded grout is composed of a cement-based mix that includes sand particles. The addition of sand helps make the grout more durable and less prone to shrinking, since the sand particles in the grout provide additional strength, making it less likely to crack over time.

Read more