Skip to main content
  1. Home
  2. Home Maintenance

Everything you need to repair broken concrete stairs

By

Concrete stairs are common features in homes, specifically outdoors, near entryways, or in backyards. Concrete is an obvious choice for outdoor steps due to its high level of durability and long-lasting qualities. However, even concrete will wear over time and become damaged.

High levels of foot traffic and extreme weather are the enemies of concrete stairs, and they will eventually cause cracks in the material. Cracks lead to crumbling, and crumbling gives way to large gaps in your steps. Since gaps are an obvious safety hazard, you’ll want to fix your steps as soon as possible.

outdoor concrete stairs
Yuliya Kosolapova / Pexels

Remove dust and debris

Since you’ll eventually be applying a bonding agent to the damaged area, the cracked or crumbling surface needs to be as clean and dust-free as possible. Using a wire brush, clean off dust and loose chunks of cement. As you’re brushing, look for deeper cracks that will be difficult to fill entirely with cement mix. It’s a good idea to chisel away the edges of these cracks to ensure that the cement gets packed in there tightly.

Recommended Videos

Create a wood form

You’ll need a wood form to help create your new step’s shape accurately. Cut a piece of plywood to an appropriate size and place it horizontally along the side of the step. It should be flush against the side and rise above the top of the step about an inch or two. If you are creating a corner for your step, you’ll need a second piece of plywood for the perpendicular side. Screw the two pieces of wood together into an “L” shape to make the wood form into the shape of the corner. As an optional pro tip, spray the wood’s interior side with cooking spray to prevent the cement from adhering to the wood. Place your wood form against the edges of the step and keep it flush against it using heavy objects like cinder blocks.

Related

Apply a bonding adhesive

Using a paintbrush, apply a generous amount of concrete bonding adhesive to the step’s damaged area. The adhesive instructions should explain how much to use and how long to let it dry, depending on how many inches of concrete you’ll be layering on. Drying time is typically between one and three hours.

plants and fruit on concrete steps

Create your concrete mix

Be sure your step is prepped, and you are ready to begin applying concrete before you start creating your concrete mix. The mix will start to dry very quickly. Following the instructions on the concrete mix package, pour the mix into a large bucket or concrete tray and add the appropriate amount of water. Continuously stir up the mixture until it is the consistency of ice cream or peanut butter.

Apply concrete to damaged areas

A pointed trowel works best for this step. Use the trowel to scoop out portions of the mix and press it down onto the step’s damaged area. Be sure to press the mix into deeper cracks to prevent air bubbles that will have you repairing the step again sooner than you’d like. Overfill the damaged area a bit and then use a steel trowel to scrape away excess cement. Smooth out the top with the trowel and make the added cement level with the undamaged areas of the step.

Fill in gaps

Remove your wood form and put it aside. Check the sides of the step for gaps since, again, air bubbles will be problematic. Fill gaps in with more cement using your pointed trowel and use your steel trowel to straighten out the sides of the step. Once you’ve addressed any visible gaps, use a level to be sure the top and the sides of your new concrete step are straight and leveled out. If needed, continue adding mix or scraping it off to make it level.

Smooth the surface

For this step in this process, grab an edging tool and a damp cement sponge. Round off the edges of the step using the edging tool. A rounded edge is safer to walk on, and it actually lengthens the life of your new step since a round edge is less likely to crack against pressure and weather. Take your cement sponge and wipe it along the surface of the new cement to create a smooth appearance.

Let it dry

Check the package instructions on the cement mix to see how long it will take for your new step to dry completely. It may take a day or two, so be sure you’ve informed occupants of your project. Plan out an alternate route of accessing the building, and make sure you’ve roped off the area to avoid the headache of someone strolling through and ruining your hard work.

A damaged cement step is not only a safety hazard, but also unsightly. It’s best to get it repaired sooner rather than later since the damage will only get worse as time goes on. As you’ve seen, repairing a cement step is relatively simple, and a DIY fix is entirely within reach. With the right tools and a good amount of resolve, we’re confident you’ll get that step looking good as new in a snap.

Editors’ Recommendations

Topics
Veronica Sparks
Veronica Sparks
Contributor
Veronica Sparks is a writer from Milwaukee, Wisconsin who loves writing about gardening, home décor, and DIY life. She’s…
How to fix laminate countertops without calling a professional
You may not need to hire the pros to get your counters looking new
Modern kitchen with porcelain countertops

If your laminate countertops are stained, dated, cracked, or damaged, they can be an eyesore. If you want to give your kitchen or bathroom a quick DIY facelift, addressing a drab-looking countertop is a great first step. If you feel your countertop is salvageable with some DIY love, however, here's how to fix laminate countertops without calling a professional.

While some minor damage or basic refinishing can go a long way, there is a certain point where the damage should be addressed by a professional. If your countertop has major cracks or stains and damage covering a large portion of the surface, it may be a good idea to call in some help to repair or replace it entirely.
Removing stains

Read more
How to eliminate that musty ‘basement’ smell
Mold and mildew are big basement problems, but they can be solved
Finished basement with wood paneling

Do you avoid spending time in your basement because of its unpleasant odors? Whether it's finished or not, basements are typically cool, damp, and have little airflow going through them, which are all factors that contribute to its musty smell. Unfortunately, it takes more than general cleaning practices and air fresheners to rid the space of mustiness for good. Take a look at some of these tried-and-true methods for how to get rid of musty smell in basement spaces, so you can keep it smelling light, airy, and fresh.
1. Find the culprit of the musty smell

If you smell that common musty stench, the culprit is often mold or mildew. Since basements tend to be damp and have little airflow, they are common hot spots for mold and mildew growth. The first step in preventing further growth by sealing any leaky spots and inefficient drains.
Leaking windows and doors
Check your basement's exterior doors and windows for signs of moisture. Since leaks on the first floor can often drain into the basement, check the windows and doors on the main floor as well. If you find moisture around these entry points from rain or condensation, re-seal the area or call a professional to repair it.
Leaking pipes
Whether pipes are visible in your basement or not, you need to check them regularly for leaks. Examine any water and sewage pipes for signs of leaks and repair any cracks or poor seals. If plumber's tape or epoxy putty can't repair the leak, it's time to call a professional.
Dried-up drains
Basement floor drains direct water out of the home to keep the floors dry and prevent them from flooding. The stagnant water in this drain also traps bad odors emanating from the sewage system below. However, these drains can dry up from infrequent use, releasing stench into the air. If you notice smells arising near your floor drains, just pour a few cups of water into the drain to block the gases from escaping.
2. Clean up the basement

Read more
Sanded vs. unsanded grout: How to know which one to use
Make sure you use the right materials for your tile project
Hand applying grout to glass tile.

Choosing the right grout for your tiling project can significantly impact both the aesthetic and durability of your work. The debate of sanded vs. unsanded grout is a common one among DIY regrouting enthusiasts and professionals alike. That's why we are going to explore the differences between these two types of grout, discuss the best applications for each, and provide tips on care and cost considerations.
Sanded vs. unsanded grout: What's the difference?

Sanded grout is composed of a cement-based mix that includes sand particles. The addition of sand helps make the grout more durable and less prone to shrinking, since the sand particles in the grout provide additional strength, making it less likely to crack over time.

Read more